LAB.GRUPPEN FP 4000 | 뮤플

메뉴

본문

FP 4000

LAB.GRUPPEN
제품코드 : 8553

가격

할인 전 가격 :
₩0
도매 할인가격 :
가입안내
뮤플 할인가격 :
할인가격 상담 :
할인가격상담 이란?

옵션 & 수량 & 장바구니

수량 :

상담 할인금액 :

가격상담을 받기 전 입니다

최종 구매가격 :

장바구니담기

관심상품담기

구매정보

제품상태 :

판매중

무이자 할부:

구매 혜택 :

0W 증정

무료배송 :

10만원 이상 구매 시 무료
음향기기 > 음향 > 파워앰프 > 종류 > 파워앰프

제품사진

이 제품의 다른 시리즈 제품

뮤플의 한 마디

“”

제품 상세설명

5e0cadce5a5f5a7b34fdf6f0b3687818_NLYZYV6wxXPImulvGy7xoxZ9qPzL.jpg

5e0cadce5a5f5a7b34fdf6f0b3687818_s2mQ9Er6rD6V3QeOfv3vBm.jpg

A Benchmark For Touring Amplification
Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide. The FP Series model FP 4000 continues this tradition. At the core of the FP 4000’s performance is the patented Class TD output stage, a breakthrough amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B technology designs. Further contributing to the remarkable efficiency of the FP 4000 is a Regulated Switch Mode Power Supply (R.SMPS), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the high power density of the FP 4000. 

To keep its cool under extreme demands, the FP 4000 relies on Lab.gruppen’s proprietary Intercooler. This innovation uses thousands of copper fins to multiply the exposed heatsink surface’s rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP 4000 delivers Lab.gruppen’s’ trademark “all the power, all the time” with no degradation of sonic performance.

To maximize headroom in any application, the FP 4000 offers adjustable input gain along with Lab.gruppen’s exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers. The comprehensive warning and protection features on the FP 4000 safeguard output circuits and connected loads while also extending amplifier life and minimizing the chance of service interuptions. Whether it’s a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP 4000 gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are re-checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal. The FP 4000 is shipped with a NomadLink network interface as standard. In conjunction with DeviceControl software, NomadLink allows comprehensive monitoring of amplifier status (including fault or warning indications) and also enables remote control of power on/
off, channel mute, and channel solo functions. NomadLink is compatible with popular third-party control platforms; a separate NLB 60E NomadLink Bridge & Network Controller is required.



PRODUCT DATA
○ 높은 출력 및 다 채널 지원 – 4 채널 앰프 2U 사이즈에서 총 10000W 출력( 4 x 2500W@2Ω)
○ 4 채널 구동 – 한 개의 유닛에서 4 채널 지원으로 효율성, 유연성 및 경제성 제공, 파워 모니터 시스템, 라인 어레이, 바이 또는 트라이 앰핑 시스템에 적합. 브리지 모드 지원으로 2 채널, 3 채널 구현
○ Lab.guruppen의 사운드 퀄리티 – 오리지널 FP 모델에 비해 개선된 사운드, 동일한 안정성과 보다 높아진 효율성 제공
○ Nomadlink® 네트워크 지원
컴퓨터에서 디바이스 컨트롤 소프트웨어를 사용하여 모니터링 및 키 컨트롤 가능, 높은 신뢰성과 데이지체인 연결이 가능한 NomadLink® 네트워크
○ 특허를 획득한 Class TD 앰프 구성 – Classic B의 오디오 퀄리티를 유지하면서도 Classic D의 효율성 제공
○ 효과적인 쿨링 시스템 – 완벽하면서도 가벼운 무게의 Intercooler® 동재질 분산의 쿨링 시스템으로 피크 상태에서도 안정적인 발열 가능
○ 파라미터 조정 – 게인 선택, 전압 피크 리미터(VPL) 선택, 브리지 모드 선택
○ XLR 입력 커넥터
○ 최고 신뢰성 제공 바인딩 포스트 및 스피콘 출력
○ 안정적인 보호 및 경고 시스템 – 과출력, DC, 과열, 고주파, 회로 단락, 과부하, 메인퓨즈 보호 및 소프트 스타트
○ 정류적용 스위치 모드 파워 서플라이(R.SMPS) – 메인 전압의 유동성에서도 안정적인 출력 제공


Item
Value
General
Number of channels 2
Peak total output both channels driven 4000W
Peak output voltage per channel 121V
Max. output current per channel 50 A peak
Max. Output Power 2 ohms        4 ohms        8 ohms        16 ohms
Per ch. (both ch.’s driven)  2000 W        1600 W          800 W           400 W
Bridged per ch.  3)                4000 W        3200 W          1600 W
Performance with Gain: 35 dB and VPL: 121 V
THD 20 Hz - 20 kHz for 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal To Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Frequency response (1 W into 8 ohms) 0/-3 dB 2 Hz - 34.2 kHz
Input impedance 20 kOhm
Common Mode Rejection (CMR) >54 dB, 20 Hz to 20 kHz
Output impedance @ 100 Hz 32 mOhm
Voltage Peak Limiter (VPL), max. peak output
VPL, selectable per ch. 121, 101, 83, 70, 56, 47, 38 V
VPL, selectable when bridged 1) 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Gain and Level
Amplifier gain selectable (all channels) 1)
– rear-panel switches		 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Connectors and Switches
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Neutrik speakON or Binding Posts (must be specified upon order)
Output bridge mode per two ch.’s A B - Ch. A is signal input source
NomadLink network On board, 2 x RJ45 etherCON® connectors, IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Two fans, front-to-rear airflow, temperature controlled speed
Front-panel indicators:
Common NomadLink network; Power Average Limiter (PAL) 2); Power on
Per channel Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal;
Voltage Peak Limiter (VPL); Current Peak Limiter (CPL); Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 2) Yes
Soft start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 20 A / NEMA 5-20P
Dimensions W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”)
Weight 12 kg (26.4 lbs.)
Finish Black painted steel chassis with black painted steel / aluminum front
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

스펙

제품사진

동영상

  • 등록된 동영상이 없습니다.

사용자평가

  • 등록된 사용자 후기가 없습니다.

리뷰

질문과 답변

음향기기 > 음향 > 파워앰프 > 종류 > 파워앰프
8553
FP 4000
음향기기 > 음향 > 파워앰프 > 종류 > 파워앰프
0
KRW