제품 상세설명

CROWN CTs 시리즈

CTs시리즈는 음악 및 연설회장과 같은 SR시장에서 특히 음향기기가 고정용으로 설치되는 장소들을 위해 특별히 디자인되었습니다. 종교및 집회장소, 운동경기장, 놀이공원, 호텔, 대중교통시설, 국제회의장, 극장, 테마형식당, 회의실등 많은장소에 적합한 제품입니다.





※ 위 사진은 뮤플 사이트 파워리뷰 내의 태영태크니컬세미나 편에서 발췌

CTs 2 Channel Specifications

Minimum Guaranteed Power (20 Hz - 20 kHz)	CTs 600 Power at 0.1% THD	CTs 1200 Power at 0.1% THD	CTs 2000 Power at 0.35% THD	CTs 3000 Power at 0.35% THD
2-ohm Dual (per ch.)	150W	250W	1000W	1500W
4-ohm Dual (per ch.)	300W	600W	1000W	1500W
8-ohm Dual (per ch.)	300W	600W	1000W	1250W
16-ohm Dual (per ch.)	300W	300W	625W	625W
70V Dual (per ch.)	300W	600W	1000W	1500W
100V Dual (per ch.)	300W*	600W*	1000W	1500W
4-ohm Bridge	300W	500W	2000W	3000W
8-ohm Bridge	600W	1200W	2000W	3000W
16-ohm Bridge	600W	1200W	2000W	2500W
100V Bridge	600W	1200W*	2000W	3000W
140V Bridge	600W	1200W	2000W	3000W
200V Bridge	600W*	1200W*	2000W	3000W

Performance	CTs 600	CTs 1200	CTs 2000	CTs 3000
Frequency Response (at 1 watt, 20 Hz - 20 kHz)	± 0.25 dB
Signal to Noise Ratio (ref. rated power, 20 Hz to 20 kHz, A-weighted)	< 105 dB
Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz	< 0.1%	< 0.1%	< 0.35%	< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power	< 0.1%	< 0.1%	< 0.35%	< 0.35%
Damping Factor: 10 Hz to 100 Hz	> 3000
Crosstalk (below rated power) 20 Hz to 1kHz	> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz, typical)	50 dB
DC Output Offset	< 2 mV
Input Impedance nominally balanced, nominally unbalanced	10 k ohms,5 k ohms
Maximum Input Level Before input compression Absolute maximum	20 dBu 32 dBu
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*
Voltage Gain (at maximum level setting) 8/4 Ohm Operation 26 dB 70V Operation 100V Operation	35:1 (31 dB) 20:1 (26 dB) 50:1 (34 dB) n/a	50:1 (34 dB) 20:1 (26 dB) 50:1 (34 dB)  n/a	63.9:1 (36 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)	71.4:1 (37 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)
Input Sensitivity 2/4/8 ohms 70V 100 V 26 dB gain	1.4V 1.4V n/a 4 ohm: 1.74V. 8 ohm: 2.46V	1.4V 1.4V n/a 4 ohm: 2.46V. 8 ohm: 3.47V	1.4V 1.4V 2.0V 4 ohm: 3.17V. 8 ohm: 4.48V	1.4V 1.4V 2.0V 4 ohm: 3.88V. 8 ohm: 5.01V
Required AC Mains ( 15%, – 25%)	120V/60 Hz, 230V/50 Hz
Power Draw at Idle (120 VAC mains)	24W (Standby Mode)	24W (Standby Mode)	35W (Standby Mode)	35W (Standby Mode)
Overall Group Delay	< 120 usec
Cooling	Continuously variable speed forced air, front-to-back airflow
Dimensions Width Height Depth	19 in. (48.3 cm.) 3.5 in. (8.9 cm.) 14.25 in. (36.2 cm.)
Net Weight Shipping Weight	22.8 lb (10.3 kg), 27.7 lb (12.6 kg)	23.4 lb (10.6 kg), 28.3 lb ( 12.8 kg)	27.0 lb (12.2 kg) 32.0 lb (14.5 kg)	27.7 lb (12.6 kg) 32.7 lb (14.8 kg)

* With T-170V or TP-170V.

CTs 4 & 8 Channel Specifications

CTs 4200: MINIMUM GUARANTEED POWER (in watts, 0.1% THD) 120VAC, 60 Hz units
Dual Mode
Channels Driven	4		2	1
	1 kHz	20 Hz - 20 kHz	1 kHz	1 kHz	20 Hz - 20 kHz
4 Ohm	260	215	270	270	225
8 Ohm	180	190	210	220	210
70V (25 Ohm) at 0.1% THD	220	220*	240	250	245*
Bridge-Mono Mode
Channel-Pairs Driven		2		1
		1 kHz	20 Hz - 20 kHz	1 kHz	20 Hz - 20 kHz
8 Ohm		520	430	560	450
16 Ohm		400	380	440	420
100V (50 Ohm) at 0.1% THD		220	220*	250	245*

* Constant Voltage full bandwidth power ratings support 100 Hz - 20 kHz due to automatic high-pass filters.

CTs 8200: MINIMUM GUARANTEED POWER (in watts, 0.1% THD) 120VAC, 60 Hz units
Dual Mode
Channels Driven	8		4	2	1
	1 kHz	20 Hz - 20 kHz	1 kHz	1 kHz	1 kHz	20 Hz - 20 kHz
4 Ohm	200	175	250	260	270	230
8 Ohm	160	155	190	200	220	220
70V (25 Ohm) at 0.1% THD	200	185*	220	240	250	230*
Bridge-Mono Mode
Channel-Pairs Driven		4		2	1
		1 kHz	20 Hz - 20 kHz	1 kHz	1 kHz	20 Hz - 20 kHz
8 Ohm		400	350	500	540	460
16 Ohm		320	310	380	440	440
100V (50 Ohm) at 0.1% THD		200	185*	220	250	230*

* Constant Voltage full bandwidth power ratings support 100 Hz - 20 kHz due to automatic high-pass filters.

Performance	CTs 4200	CTs 8200
Frequency Response (at 1 watt, 20 Hz - 20 kHz)	± 0.5 dB
Phase Response (at 1 watt, 10 Hz - 20 kHz)	± 35°
Signal to Noise Ratio below rated power (20 Hz to 20 kHz)	100 dB unweighted
Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz	< 0.05%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from 163 milliwatts to full bandwidth power, typical	< 0.05%
Damping Factor: 10 Hz to 400 Hz	>180
Crosstalk (below rated power, 20 Hz to 1 kHz)	> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)	> 50 dB
DC Output Offset (Shorted input)	< ± 5 mV
Input Impedance nominally balanced, nominally unbalanced	20 kilohms, 10 kilohms
Maximum Input Level (before input compression)	20 dBu
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono	4/8 and 25 ohms (70V) 8/16 and 50 ohms (100V)
Voltage Gain (at maximum level setting), 1.4V sensitivity 4/8 Ohm Operation 70V Operation 100V Operation	20:1 (26 dB) 50:1 (34 dB) 71.4:1 (37 dB)
Required AC Mains (model dependent)	120V, 60 Hz. 220/230/240V, 50 Hz	100V, 50/60Hz. 120V, 60 Hz. 220/230/240V, 50 Hz
Power Draw at Idle (120VAC mains, all channels in 4/8 ohm mode)	70W
Power Draw at Idle (120VAC mains, all channels in 70V mode)	114W
Cooling	Continuously variable speed forced air, front-to-back airflow
Dimensions: Width, Height, Depth	19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.25 in. (41.3 cm) D	19 in. (48.3 cm) W x 5.25 in. (13.3 cm) H x 16.25 in. (41.3 cm) D
Net Weight, Shipping Weight	26 lb. 6 oz. (12 kg), 30 lb. 14 oz. (14 kg)	36 lb. 6 oz. (16.5 kg), 47 lb. (21.3 kg)

스펙

제품사진

동영상

• 등록된 동영상이 없습니다.

사용자평가

• 이번에 새로나온 엠프입니다 ^^ 2004-04-13 오전 5:52:32 이주성

  디자인 : 성능 : 가성비 :
  신기술이 도입된 제품으로 이번에 새로나온 제품입니다
  
  아직 많은 곳에서 사용하고 있지는 않지만 저항임피던스에 상관없이
  
  2옴 4옴 8옴에서 모두 같은 출력을 내는 제품입니다
  
  600은 작아서 조금 그렇지만 1200 2000부터는 상당한 퀄리티를 가지고 있습니다
  
  바이엠핑이나 트루엠핑때 트위터부에 지금 600을 물리곤하지요 ^^

리뷰

질문과 답변